Key | Action |
---|---|
S | Add a 9V Straight track |
L | Add a 9V Left curved track |
R | Add a 9V Right curved track |
Y | Add a 9V rail point track extending to the left like the top left stroke of the Y |
K | Add a 9V rail point track extending to the right like the top stroke of the K |
X | Add a 9V cross track, crossed as a X |
F | Add a Flex track |
↑ | Move the selection up |
↓ | Move the selection down |
← | Move the selection left |
→ | Move the selection right |
Page Up | Bring the selection to the front |
Page Down | Send the selection to the back |
Numpad 0 | Rotate the selection to the left (counter-clockwise) |
Numpad . or space | Rotate the selection to the right (clockwise) |
↵ | Change the active connection point of the selected part to the next connection point (of the same part) |
Backspace or Delete | Delete the current selection |
Mit der Schaltfläche 1 können Sie alle Einstellungen auf ihre Standardwerte zurücksetzen, wie bei der Erstinstallation von BlueBrick. Mit der Schaltfläche 2 können Sie nur die Einstellungen wiederherstellen, die in der aktuell sichtbaren Kategorie angezeigt werden.
Hinzufügen von Tastaturkürzeln ist mit Hilfe der vier Auswahlmenüs unterhalb der Tastaturkürzel-Liste (Menü Bearbeiten, Allgemeine Einstellungen...) möglich: Wähle zuerst die Taste aus 3, der eine Funktion zugeordnet werden soll, und dann die Funktion 4. Bei der Funktion "Teil hinzufügen" muss noch die Teil- oder Setnummer ausgewählt 5 und der Verbindungstyp 6 angegeben werden. Zum Abschluss muss nur noch die Schaltfläche "Tastenkürzel hinzufügen" 7 angeklickt werden.
Ein Tastaturkürzel kann nicht direkt geändert werden. Um einer Taste eine andere Funktion zuzuweisen, muss zunächst das Tastaturkürzel gelöscht werden. Danach kann der Taste eine neue Funktion zugewiesen werden.
Wird dann die Schaltfläche "Ok" angeklickt, werden die Standardeinstellungen wieder eingestellt.